Thank you very much for purchasing this product.
* “M-G-VM600” is referred to as “this product” in many parts of this manual.
This product is a full cover grip sheet that can cover the entire mouse.
1) Before applying the grip sheet, remove dust and dirt from the surface with the included cleaning cloth.
2) Align the grip sheet for the main unit with the middle line and attach it to the red line.
3) Apply slowly so that the position of the RGB LED lamp is in the center of the hole.
4) Apply while slowly stretching out the wrinkles.
5) Affix according to the red line, then apply according to the hole of the side button.
6) Affix while filling in the gap in the red line part.
7) Apply the remaining part(s) while slowly stretching out the wrinkles.
8) Paste the opposite side while stretching the wrinkles to match the red line as well.
9) Attach the grip sheet for the left button and the right button to match the position of each button.
10) Affix the grip sheet to the top button.
11) Affix the grip sheet to the “back” and “forward” buttons.
12) You can also attach a grip sheet to the RGB LED lamp part.
You can use it however you like.
13) You can also attach a grip sheet to the bottom of the receiver extension adapter.
It can be used as a non-slip surface when the receiver extension adapter is placed on the desk. You can use it however you like.
When peeling off the grip sheet from the left and right buttons, peel it off from the inside of the mouse.
If you try to peel it off from the outside forcibly, the button may be damaged.
Please replace with new ones if the surface is worn down or if the adhesive has lost its strength.
Full cover grip sheet is available for sale separately.
Mouse grip sheet: M-G-VM600
